Roughness Reduction Modeling while Vibration Treatment in a Free Abrasive of the GTE Hot Section Products from a Heat Resistant Alloy, Obtained by Selective Laser Melting

Mechanical Engineering and Machine Science


Аuthors

Khaimovich A. I.*, Zlobin E. P.**, Skuratov D. L.***

Samara National Research University named after Academician S.P. Korolev, Moskovskoe shosse, 34, Samara, Russia

*e-mail: berill_samara@bk.ru
**e-mail: zlobin.ep@ssau.ru
***e-mail: skuratov-sdl56@yandex.ru

Keywords:

abrasive ceramic bodies, selective laser fusion, VZH159 heat-resistant alloy, machining conditions, surface roughness, correlation analysis, regressive analysis

References

  1.  Dmitrieva MO, Mel’nikov AA, Nosova EA, et al. Studying the VT16 titanium alloy microstructure forming while compressor impeller manufacturing of the small-sized gas turbine engine by additive technologies methods. Aerospace MAI Journal. 2023;30(2):196-203. (In Russ.). DOI: 10.34759/vst-2023-2-196-203
  2.  Alekseev VP, Khaimovich AI, Smelov VG, et al. Testing a Statistical Quality Control Method Based on Short-Run Control Charts for Small Batch Production on the Example of Selective Laser Sintering of Blanks of Gas Turbine Engine Blades. Russian Engineering Research. 2024;44(11):1623-1628. DOI: 10.3103/S1068798X24702666
  3.  Smelov VG, Kokareva VV, Chupin PV, et al. Technological process design for selective laser fusion of a heat-resistant alloy for the burner device manufacturing. Aerospace MAI Journal. 2023;30(1):131-141. (In Russ.). DOI: 10.34759/vst-2023-1-131-141
  4.  Srinivasan D, Ananth K. Recent advances in alloy development for metal additive manufacturing in gas turbine/aerospace applications: a review. Journal of the Indian Institute of Science. 2022;102(1):311-349. DOI: 10.1007/s41745-022-00290-4
  5.  Khairulin VT, Samokhvalov NYu, Tikhonov AS. Evaluation of blade roughness influence on high pressure turbine efficiency. Vestnik PNIPU. Aerokosmicheskaya tekhnika. 2014(37):99-111. (In Russ.).
  6.  Pimenov D.Y.,  Berti L.F., Pintaude G.,  et al. Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys: comprehensive review and future prospects // The International Journal of Advanced Manufacturing Technology. 2023. Vol. 127. No. 3, pp. 1071-1102. DOI: 10.1007/s00170-023-11541-8
  7.  Shvetsov AN, Skuratov DL. Diamond burnishing process parameters impact on the surface layer quality of the parts while aviation technology products manufacturing. Aerospace MAI Journal. 2023;30(4):220–231. (In Russ.). URL: https://vestnikmai.ru/publications.php?ID=177623
  8. Smirnov AS, Galinovsky AL, Martysyuk DA. R Reducing Additive Product Surface Roughness by Electrochemical Processing Methods. BMSTU Journal of Mechanical Engineering. 2022(7):16–23. (In Russ.). DOI: 10.18698/0536-1044-2022-7-16-23
  9. Goncharov ES, Balyakin AV, Nosova EA. Study of surface of titanium alloy samples obtained by selective laser fusion and hydroabrasive polishing. Materialy Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Problemy i perspektivy razvitiya dvigatelestroeniya” (June 23-25, 2021). Samara: Samarskii universitet; 2021. Vol. 1. p. 295-296. (In Russ.).
  10.  Yao CF, Sun YQ, Tan L, et al. Investigation of control method on blade shape accuracy of blisk in vibration finishing. Advances in Manufacturing. 2025;13(2):377-394. DOI: 10.1007/s40436-024-00505-0
  11.  Tamarkin MA, Smolentsev EV, Kolganova EN. Analysis of the modern condition of deburing details having small grooves and holes in the media of free abrasives. Vestnik Voronezhskogo gosudarstvennogo tekhnicheskogo universiteta. 2019;15(1):122-129. (In Russ.). DOI 10.25987/VSTU.2019.15.1.019
  12.  Ponomarev KE, Strelnikov IV, Antonov AA, et al. Efficiency of using vibration treatment of welded stainless steel structures atthe welding stages and after its completion. Svarochnoe proizvodstvo. 2021(8):22-29 (In Russ.).
  13.  Tamarkin MA, Tishchenko EE, Muratov DK, et al. Investigation of fluid movement dynamics in working chambers for vibration processing of parts. Progressive Technologies and Systems of Mechanical Engineering. 2024(1):58–67. (In Russ.).
  14.  Volkov DI, Tolkachev AV. Methodology for determining the parameters of the dynamic interaction of an abrasive pellet and a blade tip in circular vibration polishing units. Vestnik RGATA im. P.A. Solov'eva. 2015(1):94-99. (In Russ.).
  15.  Akulinichev PD, Albov MA, Goncharov AA. Analysis of the abrasive material dynamic action on a workpiece in machining the complex-profile surfaces with the flow tumbling. BMSTU Journal of Mechanical Engineering. 2024(2):44–51. (In Russ.).
  16.  Radziejewska J, Marczak M, Maj P, et al. The Influence of Vibro-Assisted Abrasive Processing on the Surface Roughness and Sub-Surface Microstructure of Inconel 939 Specimen Made by LPBF. Materials. 2023;16(23):7429. DOI: 10.3390/ma16237429
  17.  Grigoriev SN, Metel AS, Tarasova TV, et al. Effect of cavitation erosion wear, vibration tumbling, and heat treatment on additively manufactured surface quality and properties. Metals. 2020;10(11):1540. DOI: 10.3390/met10111540
  18.  Zlobin ЕP, Khaimovich АI, Balyakin АV. Investigation of the process of vibration processing of AlSi10Mg aluminum alloy samples obtained by SLS technology. Omsk Scientific Bulletin. Series “Aviation-Rocket and Power Engineering”. 2023;7(4):65–71. (In Russ.). DOI: 10.25206/2588-0373-2023-7-4-65-71
  19.  Kuntoğlu M, Salur E, Canli E, et al. A state of the art on surface morphology of selective laser-melted metallic alloys. The International Journal of Advanced Manufacturing Technology. 2023;127(3-4):1103-1142. DOI: 10.1007/s00170-023-11534-7
  20.  Babichev AP, Motrenko PD, Gillespie LK, et al. The use of vibration technologies in the finishing and stripping operations of parts (cleaning, washing, removal of debris and burrs, edge processing). Rostov-on-Don: DSTU; 2010. 289 p. (In Russ.).
  21.  Curtis MJ, Alexander SP, Cirino G, et al. Planning experiments: Updated guidance on experimental design and analysis and their reporting III. British Journal of Pharmacology. 2022;179(15):3907-3913. DOI: 10.1111/bph.15868
  22.  Brykin VA, Ripetskii AV, Korobov KS. Studying Porosity, Structure Morphology and Mechanical Characteristics of the Products Obtained by Selective Laser Melting of the AlSi10Mg Alloy Powder. Aerospace MAI Journal. 2024;31(2):193-205. (In Russ.).  URL: https://vestnikmai.ru/publications.php?ID=180662
  23. Tamarkin MA, Tishchenko EE. Modeling of the process of surface roughness formation during processing in granular working media. Materialy II Mezhdunarodnoi nauchnoprakticheskoi konferentsii "Inzheneriya poverkhnostnogo sloya detalei mashin" (May 27-28, 2010). Minsk: BNTU; 2010. p. 147-149.
  24.  Prager SM, Solodova TV, Tatarenko OY. Investigation of the mechanical properties and structure of samples obtained by selective laser fusion (SLS) from alloy VJ159. Trudy VIAM. 2017(11):3-11. (In Russ.).  DOI: 10.18577/2307-6046-2017-0-11-1-1
  25.  Eugenov AG, Bazyleva OA, Golovlev NA, et al. Features of the structure and properties of Ni3Al intermetallic alloys obtained by the SLS method. Trudy VIAM. 2018(12):25-36. (In Russ.).  DOI: 10.18577/2307-6046-2018-0-12-25-36
  26.  Babichev AP, Babichev IA. Fundamentals of vibration technology. 2nd ed. Rostov-on-Don: DSTU; 2008. 693 p. (In Russ.).
  27.  Babichev AP, Boyko MA. The influence of manufacturing technology on the technological properties of abrasive granules on a polymer bond. In: Sbornik trudov Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Progressivnye tekhnologii mashinostroeniya i sovremennost'” (September 9-12, 1997; Simferopol). Donetsk: DonGTU; 1997. p. 18-19. (In Russ.).

mai.ru — informational site of MAI

Copyright © 1994-2025 by MAI